Maneuverability modeling and trajectory tracking for fish robot

This study develops a 6-DOF mathematical model for a robotic fish that considers surge, sway, heave, roll, pitch, and yaw. The model considers the conditions of a fish swimming in ocean current perturbations similar to the ocean current perturbations of the slender-body autonomous underwater vehicles. For swimming and turning behaviors, a nonlinear, dynamic, carangiform locomotion model is derived by using a planar four-link model. A 2-DOF barycenter mechanism is proposed to provide body stabilization and to serve as an actuating device for active control design. A barycenter control scheme is developed to change the center of gravity of the robot fish body by moving balancing masses along two axes. The projected torque on x and y axes propel pitch and roll angles to the desired settings. A Stabilizing controller, fish-tail mechanism, rigid body dynamics, and kinematics are incorporated to enable the fish robot to move in three dimensional space. Simulation results have demonstrated maneuverability and control system performance of the developed controller which is proposed to conduct path tracking of the robot fish as it swims under current perturbations.     

Extended-state-observer-based dynamic surface control of flexible-joint robot systems with input saturation

This article presents an extended-state-observer-based dynamic surface control approach for flexible-joint robot systems with asymmetric input saturation and large unknown dynamic knowledge. Traditional controllers for flexible-joint robot systems usually use approximation technology to deal with unknown dynamics knowledge. Unlike the traditional control algorithm, this article utilizes an extended state observer to estimate the unknown dynamics. For the closed-loop system, the delay strategy handles the time-scale separation issue, the filtering system overcomes the “explosion of differentiation” caused by the repeated differentiation of auxiliary control signals, and the mean-value-theorem solves the input saturation problem of the actuator. The stability analysis implies that estimation errors of extended state observers (ESOs) and other state variables are semiglobally uniformly ultimately bounded. Compared with fuzzy control algorithms, the novel ESO-based dynamic surface control approach not only omits online learning time but also uses only a few control parameters to obtain satisfactory tracking performance. Finally, a comparison simulation experiment is provided to illustrate the effectiveness of the gained conclusions.     

新型树启发式搜索算法的机器人路径规划

面对三维空间移动机器人从起始点到终止点的最短路径问题,提出一种新型的边缘点树启发式搜索(TreeEP)算法,该方法将地图空间进行密度可调的三维离散化处理,根据障碍安全距离筛选出障碍物的可靠边缘点信息,再利用树扩散架构选出最能引导搜索方向的潜力点进行扩散搜索,最终得出最短路径。提出局部调整策略,得到改进的Tree-EP算法。实验结果表明,在带障碍复杂地形最短路径搜索应用中,提出的Tree-EP算法与已有方法相比,能找到更短的移动路径。     

Development and field test of the articulated mobile robot T2 Snake-4 for plant disaster prevention

Abstract

In this work, we develop an articulated mobile robot that can move in narrow spaces, climb stairs, gather information, and operate valves for plant disaster prevention. The robot can adopt a tall position using a folding arm and gather information using sensors mounted on the arm. In addition, this paper presents a stair climbing method using a single backward wave. This method enables the robot to climb stairs that have a short tread. The developed robot system is tested in a field test at the World Robot Summit 2018, and the lessons learned in the field test are discussed.     

码垛机器人运动学分析及关节空间轨迹规划研究

以IRB-460工业机器人为研究对象,针对其运动学建模及在笛卡尔空间和关节空间下的轨迹规划方法展开研究并进行对比。对机器人本体进行了机器人运动学分析,利用多项式轨迹插值算法进行了关键点间的轨迹规划,完成了重叠型码垛的作业流程。利用Robotics Toolbox完成了轨迹规划算法仿真,并进行了结果分析。仿真结果表明在关节空间下进行轨迹插补所得的路径点更为优化,所得的轨迹更为满足作业任务,具备合理性。     

选矿摇床智能巡检机器人开发与应用

摇床受处理量、给矿浓细度等条件变化影响,床面各条矿带的颜色、位置、宽度时常改变,需要人工及时调整接矿板的位置以达到合格的精矿品位,工人劳动强度大。为了实现摇床作业的自动巡检和操作,通过计算机视觉技术采集摇床矿带照片,研究了矿带图像识别算法,并在此基础上开发了摇床智能巡检机器人。工业试验表明,摇床智能巡检机器人实现了对一组多张摇床矿带的自动采图,图像识别算法实现了对矿带宽度、边界和颜色特征的数字化识别解析,实现了自动调节接矿板至目标位置,达到了替代人工、提升选矿指标的目的。     

A design of fully soft robot actuated by gas–liquid phase change

This study aims to investigate the application of temperature gradient between the ground and the air to the locomotion of soft robot. Soft robots attract attention due to its flexible adaptability and safety to the real environment in recent years. Although many soft robots are soft themselves, they require hard material as an external device such as air compressors and external power supplies for driving. To solve the problem, some authors reported an autonomous driving robot composed of a completely flexible material using gas generation by a chemical change of hydrogen peroxide solution. However, as the driving system utilizes a chemical reaction, its driving time is relatively short. On the contrary, the proposed robot moves without electricity and any external devices such as air compressors and an electrical power supplies. It can move just on the ground using the temperature gradient between the ground and the air. In experiments, we developed some prototypes and confirmed that continuous movement could be achieved with the proposed model.     

Participatory design of a robot for demonstrating an epileptic seizure

ABSTRACT

We present the methodology and results of participatory design of a robot for presenting an epileptic seizure and a scenario of the educational workshop using this robot. Children with epilepsy encounter stigma and stereotypes and may receive inadequate aid when having an epileptic seizure. The goal of the larger project was to use the prototype device in a series of workshops for improving teachers' actions during an epileptic seizure and their attitudes towards epileptic students. In this paper, we show how various design goals for an educational robot were accomplished to fit the needs of all identified stakeholders, particularly people with epilepsy.

We used a co-design (participatory design) approach through a series of meetings participated by members of the association Polish Association for People Suffering from Epilepsy, students and faculty members of the biomedical engineering and robotics departments, teachers, psychologists and medical specialists (epileptologist, neurologist).

These meetings created an opportunity for a better understanding of the (functional and nonfunctional) requirements and resulting tradeoffs and led the participants to find appropriate solutions. Participation of people with epilepsy in the design process allowed them to deal with the potentially stereotyped representation of themselves. The prototype robot, therefore, combined goals of various stakeholders, such as an accurate presentation of an epileptic seizure, lightweight, ease of use and control, while preserving the dignity of people with epilepsy.

As a result of the co-designing process, an inexpensive robot was created and used in a series of 10 pilot workshops with 217 participants, mainly teachers of primary and middle schools. Teachers improved their understanding of epilepsy and suggested further improvements to the system.     

考虑关节角加速度约束的仿人机器人偏摆力矩控制方法

针对仿人机器人步行过程中存在的机器人关节角加速度约束影响控制性能的问题，提出一种考虑关节角加速度约束的仿人机器人偏摆力矩控制方法.该方法充分考虑了双臂在摆动过程中对偏摆力矩的影响，根据力矩平衡条件得到需要抵消的偏摆力矩的大小与方向，将偏摆力矩的控制问题转化为带约束条件的二次规划问题，并设计了一种在线变步长迭代算法计算得到优化后的双臂摆动轨迹.实验表明，该方法能有效抵消机器人步行中产生的偏摆力矩，避免控制过程中的"削峰"现象，有效提高机器人的步行稳定性.     

基于决策树的羽流追踪机器人自主决策方法研究

针对无法获得可靠羽流流向信息不利于实现羽流追踪的问题，提出了一种基于决策树的羽流追踪移动机器人自主决策方法。该方法通过移动机器人两侧的浓度传感器采集到的浓度信息，利用追踪的行为规则建立决策树模型，获得行为决策信息，使机器人高效地追踪到羽流并精确地定位。由于浓度变化关系蕴含了羽流的流向及流速信息，从而取代了传统方法中流向及流速传感器。在扩散环境下，通过移动机器人羽流追踪实验，实现了良好的源定位效果。